Operating Instructions - Black+Decker BHDT118 Manual De Instrucciones

SET UP & USE

OPERATING INSTRUCTIONS

Place the heater on a firm, level surface and plug the unit directly into a 120V
AC electrical outlet. Once it is connected to outlet the Power plug icon on the
Operating Panel illuminates and the heater is ready to use.
1. Turning the Heater ON/OFF: Press On /Off button to turn the Heater On and OFF.
2. Mode Selection: Once the Power On/Off button is pressed the heater starts in
a Low fan mode, then press the Mode Setting button Continuously to select in
between High Fan, Low Heat (750W), High Heat (1500W) and Low Fan.
NOTE: Based on the mode selected the appropriate Icon illuminates to identify the
mode in which the Heater is operating.
3. Temperature Setting: Select either Low Or High heat and then press the
temperature setting button to set the temperature to your desired level between
65˚F to 85˚F.
NOTE: Once the desired set temperature is attained the Heater Fan will turn
off automatically and will restart once temperature falls under the set
temperature to maintain constant selected temperature.
(Fan) Low
Power
Mode setting
Page 8
ON/OFF
(Fan) High
(Heat) Low
Function display
Temperature display
°F
Temperature setting
(Heat) High