Whalen PROL-36 Manual De Instrucciones página 13

Mounting the Monitor Bracket to a television with a curved / recess back
13. Determine the correct diameter of the bolt your TV requires by hand threading them into the threaded
insert on the back of the TV. If you encounter any resistance, stop immediately. If you are unable to
find the correct bolt consult a local hardware store.
14. Follow the appropriate diagram above to attach Monitor Brackets (K) to the back of your TV with the
selected fasteners. Make sure the Monitor Brackets are vertically centered and level with each other.
Secure the bolts with a Phillips screwdriver.
NOTE: Lean the TV up against a wall or other solid surface when attaching with the Monitor
Brackets. DO NOT place the TV face down on the glass this may cause permanent damage.
TV
DO NOT over tighten the bolts.
13