fourstargroup 11224984G Guia De Inicio Rapido

MODEL: 11224984G
HIGH BOY
ENTERTAINMENT CENTER
SCREWDRIVER HAMMER
STEP 1
INSTALL DOWELS (2) INTO PANELS (B) (C) (D) & (I)
USING GLUE (11), AS SHOWN.
B
B
C
I
D
11
3
STEP 6 STEP 7
ATTACH ASSEMBLED UNIT TO TOP PANEL (A) - ATTACH SIDE PANELS (B) TO TOP PANEL (A)
USING GLUE (11), AS SHOWN. USING GLUE (11), AS SHOWN.
CAUTION: PANEL (B) SMALL HOLES OUTWARD
K
F
SMALL HOLE
C
D
A
B
11
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY INSTRUCTIONS CAREFULLY. FOLLOW
THEM STEP BY STEP.
CAUTION:
1. ADULT SUPERVISION IS REQUIRED DUE TO SMALL PARTS. CARE SHOULD BE TAKEN
IN THE UNPACKING AND ASSEMBLY OF THE PRODUCT.
2. ASSEMBLE ON SOFT SURFACES TO PREVENT DAMAGE TO THE PRODUCT FINISH.
3. MAKE SURE ALL PARTS ARE INCLUDED BEFORE ASSEMBLY.
4. PLACE ENTERTAINMENT CENTER ON FLAT, LEVEL SURFACE. ENTERTAINMENT
CENTER WILL NOT BE STABLE ON HIGH PILE CARPETING OR OUT OF LEVEL
SURFACES. NOT FOR USE ON HIGH PILE CARPETING OR OTHER SIMILAR SURFACES.
5. SHOULD YOU HAVE REASON FOR CONCERN FOR STABILITY AND SECURITY, TIPPING
OR KNOCKING OF THE TELEVISION DUE TO, BUT NOT LIMITED TO, SMALL
CHILDREN, PETS OR LOCATION, PLEASE TETHER TELEVISION TO THE WALL TO
PREVENT IT FROM TIPPING. TETHER NOT INCLUDED, REFER TO TELEVISION USER'S
MANUAL OR AFTER MARKET ACCESSORY DEALERS.
6. NOT FOR USE WITH TUBE STYLE, CRT TELEVISIONS. WEIGHT LIMIT 135 LBS.
Do you have any questions? Missing small parts or hardware? If you need assistance with the assembly
of your HIGH BOY ENTERTAINMENT CENTER please e-mail our Customer Service Department at:
support@fourstari.com or call us at (508) 473-7688, (800) 639-3803 or
visit www.fourstari.com
Please include the following information when contacting us:
• Where item was purchased
• Item, model, style or SKU number listed on instructions or box
• Part number, description of the part and quantity needed
This information will help us get the proper part to you faster.
STEP 2
- INSTALL DOOR HOLDERS (5) INTO DOOR
PANELS (G) & (H), AS SHOWN.
- INSTALL SCREW (4) TO DOOR PANELS (G) & (H),
AS SHOWN.
- INSTALL HANDLE (7) TO DOOR PANELS (G) & (H)
USING SCREW (8), AS SHOWN.
STEP 8
- ATTACH SIDE PANELS (B) TO BOTTOM PANEL
(F) USING SCREWS (1), AS SHOWN.
- ATTACH PANELS (I) TO TOP PANEL (A)
GLUE (11), AS SHOWN.
SMALL HOLE
1
K
F
B
K
C
I
D
A
11
B
NO
A TOP PANEL
B SIDE PANEL
C CENTER LEFT PANEL
D CENTER RIGHT PANEL
E SHELF PANEL
F BOTTOM PANEL
G LEFT DOOR PANEL
H RIGHT DOOR PANEL
I FRONT PANEL
J BACK PANEL
K
LEG PANEL
STEP 3
INSTALL MAGNECTIC CATCHES (3) TO TOP
PANEL (A), AS SHOWN.
UNFINISHED
SURFACE
A
3
STEP 9
- ATTACH PANELS (I) TO SIDE PANELS (B) USING
SCREW (1), AS SHOWN.
- INSTALL NAIL LEGS (9) TO PANELS (B) (I) & (K),
USING
AS SHOWN.
9
FINISHED
SURFACE
F
I
B
D
C B
A
D
I
11
FINISHED
SURFACE
PARTS LIST AND HARDWARE
PARTS LIST QTY NO HARDWARE LIST
1pc 1 C/B SCREW M4x32mm
2pcs 2 DOWEL M5x20mm
1pc 3 MAGNECTIC CATCHES
1pc 4 TAPPING SCREW M5x8mm
2pcs 5 (SPRING) DOOR HOLDER
1pc 6 SHELF SUPPORT
1pc 7 HANDLE (MOON)
1pc 8 P/H SCREW M3.6x15mm
2pc 9 NAIL LEG
2pcs 10 POWER PIN
1pc
11 GLUE
STEP 4
ATTACH LEG PANEL (K) TO BOTTOM PANEL (F)
USING SCREWS (1), AS SHOWN.
FINISHED EDGE
1
SURFACE
F
K
UNFINISHED
SURFACE
STEP 10
- ATTACH BACK PANELS (J) TO
THE BACK POSITION OF
ASSEMBLED UNIT USING POWER
PIN (10), AS SHOWN.
K
F
I
B
C
STEP 11
- ATTACH DOOR PANELS (G) & (H) TO
PANEL (A) & (F), MAKE SURE DOOR
A
HOLDERS (5) INTO THE HOLE,
AS SHOWN.
- INSTALL SHELF SUPPORTS (6) TO
PANELS (C) & (D), MAKE SURE LEFT
AND RIGHT HOLE AT THE SAME
1
LINE, ATTACH SHELF PANELS (E) ON
THE SHELF SUPPORT(6) AS SHOWN.
QTY
14pcs
10pcs
2pcs
2pcs
4pcs
8pcs
2pcs
4pcs
7pcs
16pcs
1pc
STEP 5
ATTACH PANELS (C) & (D) TO BOTTOM PANEL (F)
USING SCREW (1), AS SHOWN.
FINISHED EDGE
SURFACE
FINISHED EDGE
SURFACE
D
C
F
K
1
10
J
A
C
J
F
B
K
I