For The Safety Of Your Child; Unpacking And Connecting; Operation; Switching The Device On And Off - ULTIMATE SPEED UAMM 12 A1 Instrucciones De Servicio

Respaldo de asiento con función masaje
Ocultar thumbs Ver también para UAMM 12 A1:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

RP77422 Automass LB5 Seite 30 Donnerstag, 30. August 2012 4:27 16
• Never use the device in the car while it is
in motion. It may cause a distraction and
endanger traffic safety. If you wish to
change the settings, stop the vehicle.
4.5 Protection against injury
Warning! The surface of the device
is hot. Persons who are sensitive to
heat must take care when using the
device.
5.1 Using the massage mat in a car
1. Place the massage mat 1 on the car seat.
2. Fasten the massage mat 1 carefully with
the securing straps 2.
3. Plug the car lead 12 into the cigarette
lighter
or
another
connection.
4. Plug the power plug 11 on the car lead
12 into the power socket 10.
The
remote
control
illumination. If this does not come on, the
background illumination will be switched on
first when button 5, 6 or 7 is pressed for the
first time. Only when the background
illumination is on does the button have the
function described below. The background
illumination goes off again after about 5
seconds.
If you press the OFF button 4, the device
switches off immediately.
30

4.6 For the safety of your child

5. Unpacking and connecting

5.2 Using the massage mat at home
1. Place the massage mat 1 on a suitable
2. Fasten the massage mat 1 carefully with
suitable
12 V
3. Plug the mains adapter 13 into a mains
4. Plug the power plug 11 on the mains

6. Operation

has
background

6.1 Switching the device on and off

1. To switch the device on, press the ON
Warning! Ensure that the packing
film does not become a deadly trap
for a child. Packing film is not a
toy.
chair or armchair.
the securing straps 2.
socket that complies with the technical
data.
adapter 13 into the power socket 10.
button 6.
The LCD display 3 shows "MODE 0".
As soon as the device is switched on, the
timer will automatically start running at
30 minutes. The remaining time is shown
in the LCD display 3.
To protect the device from being
accidentally left on, it automatically
switches off again after 30 minutes.

Publicidad

Tabla de contenido
loading

Tabla de contenido