INSTRUCCIONES IMPORTANTES DE SEGURIDAD
03006
REF.
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
INSTRUCTIONS
EN
MODEL 03006
To get the best results in the safest way possible from this product, please read this manual carefully before
use and keep it for future reference.
GENERAL INFORMATION
1. Setting the current time
Turn the programming dial so that the arrow is aligned with the "PRESENT TIME".
2. Establishing the run time
Keep the dial at the "PRESENT TIME" position and press the keys around the dial down to indicate the start
and finish times: each key represents 15 minutes.
3. Activation
Once the timer is set, connect it to both the desired electrical circuit or device and the power supply. Turn the
timer on with the switch in the "
" position and the device or circuit will switch on automatically every day
according to the timer, without the need to alter it.
ATTENTION
The device or circuit will only work properly when the side switch is "ON".
This timer requires 3,500 Watts (230 V–50 Hz)
WASTE
This symbol on the product or in the instructions means that your electrical and electronic equipment should
be disposed at the end of its useful life in a specialized container; do not dispose of in the normal household
waste container. There are special waste collection systems for recycling in the EU. For more information,
please contact the local authority or the retailer where you purchased the product.
WARRANTY
The warranty period is 24 months from the date of purchase and covers all manufacturers failures in material
and quality. This warranty applies only if you have followed the instructions, and is void if the unit has been
forced or has been used improperly and inadequate, or if it has been repaired by an unauthorized person.
THE BILL IS THE PRODUCT WARRANTY
-4-