DPM Dew Point Meter Manual De Instrucciones página 7

Set Clock
All measurements are date and time stamped (24-hour format)
when stored into memory. It is therefore important to set the
correct date and time. Use the
value, and the
and time setting can also be viewed at the top of the main menu.
Battery Type
Selects the type of batteries used in the Gage from a choice of
"Alkaline", "Lithium" or "NiMH" (nickel-metal hydride rechargeable).
The battery state indicator symbol is calibrated for the selected
battery type. No damage will occur if the battery type used in the
Gage does not match the selected battery type.
Anemometer
Dew point (Td) and surface temperature (Ts) are not
NOTE:
displayed when the Anemometer is enabled.
and buttons to adjust it. The current date
(PosiTector DPM-A probes only)
Air Temperature &
Relative Humidity
Hot Wire Anemometer
Slide cover down to
expose hot wire
anemometer
Surface Temperature
and buttons to select a
6