FIGURE 2
2
3
Step 2:
Fasten the center connector with ring (#3) to the
middle of the legs (#2) by using bolts (#5).
that all of the bolts have been tightened completely.
See Figure 2.
FIGURE 4
Cleaning and Maintenance
• Wash frame parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach, acid, or other
solvents on the frame parts.
• Inspect and tighten all bolts and fasteners on a regular basis to ensure the proper performance and safety of your table
• When moving the table, remove the umbrella and lift. Do not drag this table.
• We recommend the use of furniture covers when not in use.
• In order to prolong the life and beauty of your table, we recommend that it be stored in a dry and protected area
during off season periods.
• The umbrella should be lowered and/or removed in windy conditions.
Warranty
• This product is covered by Courtyard Creations Inc.'s 3 year limited warranty.
• Proof of purchase (dated register receipt) is required for warranty claims.
• It remains the customer's responsibility for freight and packing charges to and from the service center.
STOP!
Missing A Part?
No Need To Go Back To
The store where you made your purchase
does not stock parts for this item.
whether they are missing or damaged,
TEL: 1-877-539-7436
FAX: 1-877-539-7439
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
For further assistance,
service.cci@polywares.com
V-3
5
2
Make sure
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL OF THE PARTS, MAKING SURE THAT
YOU HAVE ALL OF THE PARTS LISTED.
IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME
The Store
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT
If you need parts,
1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.
PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
Call Toll Free:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS
please visit us at
PRODUCT TO THE RETAILER.
STOP
DO NOT RETURN TO THE STORE!
FIGURE 3
A
Step 3:
Turn the table to its upright position. Then, carefully put
the tiles (#4) onto the table top (#1). See Figure 3 and
Figure 4.
Note:
1.
If any of the EVA foams on the table top (#1) are
missing, there are extra EVA foams in the hardware
kit. See Illustration A.
2. To use an umbrella with this table, remove the plastic
center plug and put the umbrella pole through the
table top and center connector ring.
LIST.
PAGE 2 OF 2
4
1