System Build 2936015COM Libro De Instrucciones página 15

STEP 8
Carefully turn your unit over on its front. Position the back panel (K) as shown. Flush bottom edge
with bottom edge of center shelf (F). Align squarely and nail (12) straight into back edges as shown
Assure that the unit is square.
Distance from corner to corner
must be equal as shown.
systembuild.com
12
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
(x26)
#A21110
B
K
"raw surface shown"
15
12
F