Descargar Imprimir esta página

Reelcraft 5005 Serie Instrucciones De Operación

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Operating Instructions
Series 5005 Spring Driven Hose Reels
Low and Medium Pressure Model Numbers:
A5805 OLP118
A5806 OLP118
A5835 OLP118
A5850 OLP118
Dimensions
A
B
C
D
Four 5/16" diameter mounting holes
ORIGINAL INSTRUCTIONS
Noise is less than 70 dB(A)
INSTALLATION:
A flexible hose connection must be used between the hose reel inlet and the source of supply to prevent possible
misalignment and binding.
MOUNTING:
The hose reel is equipped with a universal mounting bracket so that it can be mounted on the floor, wall or
ceiling; whichever place is convenient. The hose guide arm can be moved to the position desired by removing
the screws fastening the guide bracket to the reel base. Shift the guide arm bracket so the hose comes off the
reel at the desired position and replace the screws. NOTE: For proper installation in wall mount applications, ensure
reel is mounted with inlet on the right as you are facing the reel. Failing to do so could cause latching issues.
LUBRICATION:
Hose reel spring and bearings are factory lubricated and require no further lubrication.
REPLACING HOSE: 1. Wind spool flange clockwise-facing swivel-until spring is tight.
2. Back off three turns and latch.
3. Insert hose through roller guide.
4. Connect hose fitting to swivel joint and secure hose with clamps.
ADJUSTMENTS:
To adjust spring tension, add or remove wraps of hose from the spool, one wrap at a time until desired tension is
obtained.
REPAIRS:
Extensive repairs should be performed only by an authorized serviceman or factory to avoid damage which may
void your warranty. Remove all spring tension before beginning disassembly process.
Reelcraft International Inc. • Ph: +44 (0) 1536 406999 • Fax: +44 (0) 1536 406777
Unit 17 - Cronin Courtyard, Weldon South Industrial Estate, Corby - Northamptonshire NN18 8AG
europe@reelcraft.com • www.reelcraft.com/europe
A5805 OMP118
A5835 OMP118
A
448 mm
B
419 mm
C
248 mm
D
64 mm
E
E
149 mm
1. Do not use reel at higher pressures or temperatures than listed on
the back of this bulletin.
2. Remove all spring tension before beginning dissassembly process.
SAFETY
Form# R907-897 Rev: 11/2019

Publicidad

loading

Resumen de contenidos para Reelcraft 5005 Serie

  • Página 1 Remove all spring tension before beginning disassembly process. Form# R907-897 Rev: 11/2019 Reelcraft International Inc. • Ph: +44 (0) 1536 406999 • Fax: +44 (0) 1536 406777 Unit 17 - Cronin Courtyard, Weldon South Industrial Estate, Corby - Northamptonshire NN18 8AG...
  • Página 2 3/8” FPT 3/8” FPT 3/8” FPT 3/8” FPT Max. Operating Pressure 35 bar 21 bar 35 bar 21 bar 207 bar 224 bar Max. Operating Temperature 99 °C 65 °C 99 °C 65 °C 99 °C 99 °C Page 2 www.reelcraft.com...
  • Página 3: Instrucciones Originales

    Remueva todos los resortes de tension antes del proceso de desmontaje. Page 3 Form# R907-897 Rev: 11/2019 Reelcraft International Inc. • Ph: +44 (0) 1536 406999 • Fax: +44 (0) 1536 406777 Unit 17 - Cronin Courtyard, Weldon South Industrial Estate, Corby - Northamptonshire NN18 8AG europe@reelcraft.com • www.reelcraft.com/europe...
  • Página 4 3/8” FPT 3/8” FPT 3/8” FPT Presión Máx. de Operación 35 bar 21 bar 35 bar 21 bar 207 bar 224 bar Temp. Máx. de Operación 99 °C 65 °C 99 °C 65 °C 99 °C 99 °C Page 4 www.reelcraft.com...
  • Página 5: Instructions D'opération

    Enlevez toute tension de ressort avant de désassembler. Page 5 Form# R907-897 Rev: 11/2019 Reelcraft International Inc. • Ph: +44 (0) 1536 406999 • Fax: +44 (0) 1536 406777 Unit 17 - Cronin Courtyard, Weldon South Industrial Estate, Corby - Northamptonshire NN18 8AG europe@reelcraft.com • www.reelcraft.com/europe...
  • Página 6 3/8” FPT 3/8” FPT 3/8” FPT Pres. de fonctionnement maxi. 35 bar 21 bar 35 bar 21 bar 207 bar 224 bar Temp. de fonctionnement max 99 °C 65 °C 99 °C 65 °C 99 °C 99 °C Page 6 www.reelcraft.com...

Este manual también es adecuado para:

A5805 olp118A5835 olp118A5806 olp118A5850 olp118A5805 omp118A5835 omp118