Power supply for feeding CM headend modules. Allows
management of headend both by USB and RJ45 (LAN /
FA 524
Internet+CM Key). Rackable or Wall support.
Power 120W (5Vdc – 24A).
Device for the programming of a single CM module through
CM PR
the USB port.
Power supply for feeding a single CM headend module.
FA 55
Power 25W (5Vdc – 5A).
Wall mount frame for 7 CM headend modules in total
CHM TR
(including FA 524).
19" rack mount frame for 7 CM headend modules in total
CHR TR
(including FA 524).
Wall mount frame for 3 CM headend modules in total
CH 3 TR
(including FA 524).
License (Key) for the remote management of the CM headend
CM KEY
by using the CM Management software. The license is linked to
a FA 524.
Streamer-modulator. Reception of up to 15 SPTS/MPTS IP
streams and modulation into 4/4 adjacent DVB-T/C channels at
CM IP-TC
the output.
Flexible remultiplexation of the services at the output.
Remote controlable from FA 524.
DVB receiver-streamer. TWIN tranmodulator DVB-S/S2/T/T2/C
to IP with double common interface (CI). Flexible
remultiplexation of services into 16 SPTS streams. Also handles
CM 2STC CI-IP
MPTS. UDP / RTP and QoS transmission. SAP function.
USB player of .TS files as another service.
13/18V 22KHz and DiSEqC control.
Remote controlable from FA 524.
DVB receiver-streamer. QUAD tranmodulator DVB-S/S2/T/T2/C
to IP. Flexible remultiplexation of services into 16 SPTS streams.
Also handles MPTS. UDP / RTP and QoS transmission. SAP
CM 4STC-IP
function.
Double USB player of .TS files as other services.
13/18V 22KHz and DiSEqC control.
Remote controlable from FA 524.
4x AV input to IP encoder & streamer. 100Mbps with flexible
CM 4AV-IP
remux of services. Remote controlable from FA 524.
4x HDMI 1080p input to IP encoder & streamer. 100Mbps with
CM 4HD-IP
flexible remux of services. Remote controlable from FA 524.
EN