Setting Mode; How To Set; User Setting - Tenker U80EH Manual De Instrucciones

Setting mode

Note：
- When use AC adapter, the power of battery won't be consumed.
- When suddenly stop during measurement (like the plug off from the
outlet by carelessness), it must be reinserted the plug into the unit, and
restart the measurement

How to set

1. User setting：
Press button SET when power off , the screen will display or , press
button MEM .it will be changed between and , press button SET when
you confirm the user, then it will enter into the year setting mode.
user 1 user 2
2. Year setting:
Continue to above step, the screen will display and flash 20XX, the last
digit of the year will increase 1 when press button MEM each time, you
could choose from 2001 to 2099. Press button SET when you confirm the
year, then it will enter into the month and date setting mode.
Year setting
9