Dimplex Revillusion RBF24DLX El Manual Del Propietario página 14

Electrical
To install a 120 V wall switch:
1.
Pull out the red, black, and green
wires.
2.
Connect the red-N wire from the
fireplace to the neutral wire from the
power supply panel.
3.
Connect black-L from the fireplace
to the line wire from the main power
wall switch using a wire connector.
5.
Connect the other end of L (black)
to the L terminal of the main power
wall switch.
6.
Connect G (green) from the electric
fireplace to the ground wire of the
main power wall switch using a wire
connector (not supplied).
7.
Secure the two remaining ground
wires (green) with a ground screw in
the main switch wall box.
8.
Insert all the wiring of the main
power wall switch into the main
switch wall box.
9.
Insert all the wiring back into the
electric fireplace and secure with a
cable clamp.
10.
Ensure all connections are tight.
14
www.dimplex.com