Fellowes Optical Serie Guía De Instrucciones página 11

Optical Series 042704 4/27/04
B. Recarga de las pilas (modelos inalámbricos únicamente)
NOTA: a fin de asegurar el uso continuo del producto, el mouse puede utilizarse
durante el proceso de recarga.
• Indicador de carga baja: el LED
rojo del mouse se encenderá o
parpadeará lentamente (según el
modelo) cuando las pilas necesiten
recarga.
• Para recargar las pilas: tome el
cable para carga del receptor y
extiéndalo. Enchufe el cable en el
puerto de recarga de la parte
delantera del mouse.
En esta sección se hace referencia a modelos con receptores de
esta clase:
1. El LED del cargador de pilas del
receptor se encenderá para indicar
que el mouse se está cargando. Si el
LED parpadea durante la carga, las
pilas tienen una carga sumamente
baja y deberán recargarse durante
un período más prolongado a fin de
usar el mouse correctamente. No
detenga el proceso de carga hasta
que este LED esté constantemente
encendido o se apague (para indicar
que la carga está completa).
7-C
1.42 PM Page 7
(Cordless Models Only):
• Make sure the receiver is placed as close to the mouse as possible.
Objects such as computer monitors, metal cabinets and other
devices operating at the same frequency can interfere with this
product. If you can see the LED on the receiver, you should be able
to see it blink when the mouse is moved or a button is pressed.
This feature should help to determine the correct location for your
environment.
• Check to make sure you are using fresh batteries.
• Use the mouse recharging cable to charge batteries.
• Change the Channel ID the device is using by following the
instructions contained in Section 4-A.
The cursor moves uncontrollably around the screen, causing
files to open and other unexplained occurrences:
• There is a conflict with the drivers and/or devices. Please remove
all other drivers or devices until the problem is resolved.
• If available, use the other port type (USB or PS/2) to resolve the
conflict.
During the battery charging process, the red LED on the
mouse and green LED on the receiver continue to glow:
• (Select Models Only) This indicates a confused charging rate. To
correct the problem, unplug the recharging cable from the mouse
and then plug it back in.
11-A