Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Please note that this document is only a shot user manual and does not handle every function. The complete manual is available at
www.pickdata.net
TECHNICAL FEATURES
Power circuit
Input voltage
Earth connection terminal
Frequency
Maximum consumption
Working temperature
Humidity(no condensation)
Mechanical features
Enclosure material
Unit protection degree
Dimensions (mm)
Weight
Maximum operating height
Network interface
Type
Connector
Network Protocols - Accesses
Serial interface
Type
Transmission speed (Configurable)
Data bits
Parity
Stop bit
Security and electrical features
Facilitie secuity
Electric shock protection
Standards
Standards
CONNECTIONS AND LEDS
Bridge NET
196...253 Vac
47...63 Hz
9 VA
-10...+60 ºC
5...95%
UL94 – V0 self-extinguishing plastic
IP 20
35.4 x 73 x84.68 mm (2 modules)
120 g
2,000 m
Ethernet 10BaseT/ 100BaseTX self-detecting
RJ45
TCP/ UDP/ Modbus/ TCP - HTTP
RS-485 three-wires (A+/S GND/ B-) (RX/GND/TX)
1.2, 2.4, 4.8, 9.6, 19.200, 34.8, 57.6, 115.2 kbps
7 or 8
No parity, odd, even
1 or 2
Category III/ EN61010
Double-insulated class II
IEC 60664, VDE 0110, UL 94, EN61010-1, EN55011, EN 61000-4-2, EN
61000-4-3, 61000-4-11, EN 61000-6-4, EN 61000-6-2, EN 61000-6-1, EN
61000-6-3, EN 61000-4-5, CE
Power LED
RX/TX LED
Link/Activity
LED
Description
Flashing: Powered unit and CPU activity
Flashing: RS-485 frame delivery and reception activity
Flashing: Activity in the Ethernet bus
Green: Speed 10/100 Mb/s
V01-310119
Publicidad
Manuales relacionados para PickData Bridge NET
Resumen de contenidos para PickData Bridge NET
- Página 1 Bridge NET Please note that this document is only a shot user manual and does not handle every function. The complete manual is available at www.pickdata.net TECHNICAL FEATURES Power circuit Input voltage 196…253 Vac Earth connection terminal Frequency 47…63 Hz...
- Página 2 INSTALLATION Bridge NET must be connected to a power circuit with GL fuses in compliance with IEC 269, or M type with values from 0.5 to 1 A. Bridge NET Must be fitted with a circuit breaker switch or equivalent device. Power supply cabel must have a minimum cross-sectrion of 1 mm Bridge NET has been designed for DIN rail mounting.
- Página 3 Bridge NET Tenga en cuenta que este documento es únicamente una manual de usuario en versión reducida y no contiene todas las funcionalidades del equipo. El manual completo puede ser descargado en www.pickdata.net CARACTERÍSTICAS TÉCNICAS Circuito de alimentación Monofásica (A1 – A2) 196…253 Vca...
- Página 4 PickData, SL se reserva el derecho de realizar modificaciones, sin previo aviso, del dispositivo o a las especificaciones del equipo, expuestas en el presente manual de instrucciones. PickData, SL pone a disposición de sus clientes, las últimas versiones de las especificaciones de los dispositivos y los manuales más actualizados en su página Web.