Temporary Setting; Manual Setting; Stop; Information - MURPROTEC CTA Instrucciones De Uso

CTA4-Mode-d-emploi(A5)-2021

4.2. Temporary setting :

The flow rate is maintained at a certain value during the desired period.
To change the values, go to "Change" and press
Set the values with
Settings:
Air flow: 10 to 100%
Duration: 1 and 12 hours
Examples of use:
• Decrease the air flow before going to sleep to reduce noise.
• Chase away unhealth odours (cigarette, kitchen, etc.)
• Refresh the dwelling in the evening in summer

4.3. Manual setting :

You select a constant air flow and temperature for the day and a constant air
flow and temperature for the night. You set the start of the day and the start of
the night time.
To change the values, go to "Change" and press
Depending on the configuration of your installation, the programme
will recommend an air flow and temperature (You are not required
to take them into account).
Set the values with
Settings:
Basic air flow: 10 to 100%
Setpoint temperature: 5 to 18°C
Night air flow: 10 to 100%
Night temperature: 5 to 18°C
Day start time: 0 to 23 hours
Day end time: 0 to 23 hours

4.4. Stop :

The fan can be switched off manually with this programme
(for 3 hours maximum).

4.5. Information :

This menu contains a range of information about your device. It contains in particular the telephone number to contact in
case of a problem. It is accessed by pressing
Screen :
Press and
44
2/02/21 18:04
and . Confirm with
and . Confirm with
.
to scroll through the screens and
Page 46
.
.
Screen :
.
Screen :
.
Screen :
to go back to the main screen.
If the unit is connected
to the Internet: