Publicidad
Idiomas disponibles
Idiomas disponibles
TORQUE SCREWDRIVER 1-6 Nm
1/4'' Female
Torque scale
hex orive
Adjustment ring
CARE AND MAINTENANCE
1. The torque screwdriver is a precision instrument, and should be stored with care.
Don't throw it around, use hammer with it.
2. The torque screwdriver is lubricated far life and should not be oiled. The only
exception is the ratchet head which may be lubricated as needed far smooth
operation.
3. The torque screwdriver is a precision measuring instrument. Calibration must be
done regularly to ensure accuracy and it's the owner's responsibility. Suggested
calibration period is at least every 12 months or even shorter depending on
situation.
4. Always store the torque screwdriver in the box after use to stay away from dirt
and humidity .
5. Never disassemble the torque screwdriver by yourself. Far any need to
disassemble the torque screwdriver or repair it, please look far assistance
from qualified service station. Any incorrect action to disassemble the torque
screwdriver may result in damage of this instrument.
1.
COD.79889-79890-79891
-
-
-
-
-
Handle
ENGLISH
according to DIN ISO 6789 & ASME 8107.300-2010, and certifies it meets the
accuracy requirements of specifications DIN ISO 6789 and ASME 8107.300-2010.
OPERATION
2.
lnsert
Adjust
the bit
SAFETY INSTRUCTIONS
WARNING! RISK OF FLYING PARTICLES
Use of damaged hand tools, sockets, extensions and accessories may result in
injury.
Do not use torque screwdriver as a hammer.
Torque screwdriver not in calibration may cause damage to parts or tools.
Do not use extensions on handle as damage to torque screwdriver will result.
To avoid a "side load" occurred with inaccurate torque readings, please keep
torque screwdriver vertical to the flat of use.
ALWAYS USE EYE PROTECTION WHILE USING HAND TOOLS
STANDARD
We calibrate each torque screwdriver at the factory using torque standards
CONVERT
MULTIPLY
TO
FROM
BY
ozf-in
lbf-in
0.0625
lbf-in
ozf-in
16
lbf-in
kgf-cm
1.1519
lbf-in
lbf-ft
0.0 83 3 33
lbf-in
kgf-m
0.0 1 15 19
lbf-in
N-m
0.1130
lbf-in
dN-m
1.130
lbf-ft
N-m
1
.3
56
lbf-ft
kgf-m
0.1382
lbf-ft
lbf-in
12
N-m
dN-m
10
3.
4.
Align scale
CONVERT
MULTIPLY
TO
FROM
BY
N-m
kgf-cm
10.20
N-m
kgf-m
0.10 19 7
N-m
lbf-in
8.8507
N-m
lbf-ft
0.73756
dN-m
lbf-in
0.885
dN-m
N-m
0.100
kgf-cm
lbf-in
0.8681
kgf-cm
N-m
0.09807
kgf-m
lbf-ft
7.233
kgf-m
N-m
9.807
Publicidad
