Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5
SPECIFICATIONS
Fingerprint capacity
Technology
Authentication
Fingerprints per user
Interface
Protocol programming
Cable distance
Fingerprint Sensor Type
1:1000 identification time
Fingerprint enrolment
Green and Red LED
Orange LED
Buzzer ON/OFF
Backlight ON/OFF
Tamper
Consumption
IP Rating
Power supply
Operating Temperature
Dimensions (mm)
Storage/Operating Humidity
Colour
RECOMMENDED SWIPING TECHNIQUE
Follow the below instructions for correct finger swiping. Starting from the first finger joint, place the selected
finger on the swipe sensor and move it evenly towards oneself in one steady movement.
Result:
For a valid swipe: Tricolour Status LED turns green + OK Beep(short + long beep)
For an invalid or misread swipe: Tricolour Status LED turns red + Error Beep ( 3 short beeps)
x 6
The fingerprints are enrolled in the system by swiping the finger a minimum of 6 times.
INDICATION
up to 100 fingerprints
Biometry
Finger
1-10 fingerprints
Wiegand 8 to 128 bits; Default: Wiegand 26bit
By software
50m
Swipe Capacitive
970 msec, including feature extraction time
On the reader or from the USB desktop reader
Externally Controlled
Idle mode
Yes
Yes
Yes
100mA
65
9-14V DC
-20°C to +50°C
92 x 51 x 25 (metal); 92 x 51 x 27 (ABS)
5% to 93% RH without condensation
Silver, Red, Green, Dark Grey, Blue, White, Black
Green
- Access granted
Red
- Acceso denied
Orange
- Idle mode
OK beep
- short + long beep
ERROR beep
- 3 short beeps
Swipe finger - 2 short beeps
NETWORK MINI BK BIOMETRIC READER
51mm
92mm
Publicidad
Tabla de contenido
