MHI 65432 Instrucciones De Uso

chrome_12_color_instructions_spanish.xpress_Layout 1 12/14/18 8:33 AM Page 1
INSTRUCTIONS FOR USE:
Easy to Install:
With latches up, position Safe-er-Grip
shower wall.
Apply pressure to the handle while flipping the latches down.
Be sure to attach to smooth, dry, non-porous surfaces only.
If installed on tile, the tile must be a 4" x 4" or greater. Do not install
on tile grout lines. Not to be used on painted surfaces (ie: drywall).
IMPORTANT:
Check Safe-er-Grip regularly to ensure it is still firmly attached. If it can
be moved or feels at all loose, flip up the latches and reinstall as per
instructions above.
Easy to Remove:
Release both latches.
Slide a fingertip under rubber seal at each end to release suction.
If necessary, slide something flat, such as a credit card, under the
suction cups to release grip.
Style #65432
Made in China
CAUTION: Safe-er-Grip is to be used as a balance assist only. Not for
body weight leverage – body weight is not to be applied to product.
(If device is required to bear any body weight, or is used for leverage,
it is recommended that a traditional permanently mounted grab bar
be installed.) Check attachment before each use and reattach if loose.
TM where desired on tub or
MHI, Inc.
P.O. Box 780838
Wichita, KS 67278
Reverso
en espanol