Itm Sit'N'Go Manual Del Usuario página 30

SADDLE POSITIONING
Insert the lock washer (22) and the screw (23) into the
clamp's ring (21) and tighten without completely press-
ing. Regulate the saddle lengthwise for the forward/
backward movement and acting on the eccentric (16)
fi nd the best saddle inclination (Fig. Q). Completely lock
off the screws (18 and 23), following the torque instruc-
tion written on the piece.
WARNING!
Incorrect locking of the screw, can cause undesired
movement and damage of the saddle, of the seat-post
and of their components.
20