Status Lights; Bluetooth Connection; Nfc Connection - Rapoo S900 Manual Del Usuario

Status Lights

Power indicator
The red LED will be on when charging. After it
is fully charged, the green LED will be on.
The blue LED will blink when the Bluetooth
connection is successful.
The green LED will blink once every 2.5s
when the Bluetooth connection has stopped.
Mode selection
The green LED will be on when the headset
enters into noise-canceling mode;
The blue LED will be on when the headset
enters into 3D sound effect mode;
The purple LED will be on when the headset
enters into noise-canceling & 3D sound effect
mode;
The LED will not be lit when the headset
enters into common mode.

Bluetooth Connection

The headset enters into pairing mode automatically
after turnning it on. Activate the Bluetooth feature on
your device, and scan and search for the headset. Enter
"0000" if a password is required."

NFC Connection

Turn on the headset, activate the NFC settings on your
smartphone or other device, place your device's NFC
zone close to the headset' s NFC zone (distance within
1 cm), the headset will automatically connect to your
device.
*This method is only available for NFC-enabled devices.
3