POLYPOOL PP3130 Manual De Instrucciones página 5

WARNINGS
• Keep this product out of the reach of children or of any unauthorised person.
• Installation must be performed by qualified personnel.
• Disconnect the power supply before installation
• For installation, use rubber cable (e.g. H05RN-F 3x1 mm
• Periodically check the state of the cable and if damaged, replace it;
• Secure the device with screws suitable for the installation surfaces (plasterboard, masonry, etc.)
• Before using the device, ensure that all the screws are appropriately tightened.
• Degree of protection: IP65 against water jets and total protection against dust (Cod.3130-3138-3131-
3132-3133)
• IP44: against solid objects with Ø greater than 1mm and against water spray (Cod. 3136-3137)
• Avoid contact with the aluminium heat sink and with the glass panel when the product is in opera-
tion as it may reach high temperatures.
• (1 m) minimum safety distance between the lighting device and an easily flammable surface.
• Avoid looking directly at the projector light.
NOMINAL VOLTAGE
FREQUENCY
RATED POWER
CURRENT
POWER FACTOR
PROTECTION
DEGREE
TEMPERATURE
COLOUR
ILLUMINATION
PROJECTION ANGLE
WEIGHT
INSTALLATION
HEIGHT
TEMPERED GLASS
PROJECTION AREA
DIMENSIONS
CABLE
CRI
TECHNICAL DATA SHEET / CHARACTERISTICS
Cod. 3130-3136*-
3138
230V~
50 Hz
10W
0,09A
>0,5
IP65 - IP44*
4000K
970lm
120°
0,31kg
<3m
124×88×3 mm
4-20m²
132X 96 X 35.5 mm
H05RN-F
>80
)
2
Cod. 3131-3137*
230V~
50 Hz
20W
0,17A
>0,5
IP65 - IP44*
4000K
1800lm
120°
0,62kg
<3m
178×128×3 mm
15-30m²
187 X 137 X 39 mm
H05RN-F
>80
Cod. 3132
230V~
50 Hz
30W
0,15A
>0,92
IP65
4000K
2900lm
120°
0,97kg
<3m
222×160×3 mm
15-40m²
230 X 168 X 39 mm
H05RN-F
>80
EN
Cod. 3133
230V~
50 Hz
50W
0,24
>0,9
IP65
4000K
4200lm
120°
2,1kg
<3m
295×210×4 mm
25-50m²
303 X 218 X 44 mm
H05RN-F
>80