Technical Data; Noise Information; Vibration Information - Lista CBB-20 Manual De Instrucciones

TECHNICAL DATA

Type CGT18LA3.9 (CGT-designation of machinery, representative of Battery- powered grass trimmer)
Rated voltage
No Load Speed
Cutting Diameter
Line Diameter
Line length
Machine Weight

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
K & K =3.0 dB(A)
PA WA
Wear ear protection.

VIBRATION INFORMATION

Typical weighted vibration a
The declared vibration total value may be used for comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool can differ from
the declared value depending on the ways in which the tool is used dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of exposure level in the actual conditions of use should
also take account of all parts of the operating cycle such as the times when the tool is switched
off and when it is running idle but not actually doing the job. This may significantly reduce the exposure
level over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate)
If the tool is to be used regularly then invest in anti vibration accessories.
Plan your work schedule to spread any high vibration tool use across a number of days.
ACCESSORIES
Spool
Safety guard
Flower Guard
We recommend that you purchase your accessories from the same store that sold you the tool. Refer
to the accessory packaging for further details. Store personnel can assist you and offer advice.
32
= 2.0m/s Uncertainty K = 1.5m/s²
2
h
20V Max
8500/min
250mm
1.65mm
1*3m
1.55kg
L = 77 dB(A)
pA
L = 88 dB(A)
wA
1
1
1