Publicidad
Idiomas disponibles
Idiomas disponibles
13
Relay module
VMB1RY
Mode/
ADDR.
Time2
14
Learn
Time1
9
Term
Mode
ON
Rx
Tx
10
15
8
Normal closed contact
1
2
Normal open contact
3
12V supply
4
Velbus
6
Direct push button control
5
Relay-on indication LED
6
Out
Out
7
Mode-LED :
ON
The LED will not light if the relay is switched of.
The LED lights if the relay is witched on and the timer is not activated.
The LED blinks rapidly if the timer is activated.
The LED blinks slowly if the 2
The LED blinks fast if the module is activated in the 'learning' mode.
12
8
Forwarding LED
9
Power LED
11
Reception LED
10
11
Manual control
Time setting
12
Control mode setting
13
7
14
Adress setting
Enter a unique address (from '00' to 'FE' except for '81', '91', 'A1', 'B1', 'C1',
'D1', 'E1', 'F1' and 'FF') for each module through the 'ADDR' rotating switches
15
Termination
If the module is connected at the start or end of a cable on the VELBUS, place the
'TERM' jumper. Remove the jumper in all other cases.
nd
timer is activated in the 2-way timer mode.
ENGLISH
3
Publicidad
