Description Of Operating Message - MegaVision MV190T Manual Del Usuario

Description of operating message

*In case of connecting DVI
Mode is automatically changed. Also, there is menu that is not used in the OSD
menu, thus please note this point.
* In the resolution of 1280*1024, 1440*900, 60Hz is the optimal mode.
*Out of Frequency
Appears when the input signal is out of
the permitted range.
*Self Diagnostics
Appears when there is no input signal
from the computer.
Please check the status of connecting
cable.
(In case of Video mode)
(In case of S-video mode)
*Auto Adjust
Appears when operating Auto Adjust in
the RGB mode.
*Auto Color adjust
Appears when operating Auto color Adjust in
the RGB mode.
*Power Saver Mode
Appears when there is no input signal from
the computer in the RGB mode and the DVI mode.
This message automatically disappears after 5 seconds.
Please check the status of connecting cable.
ENG
16