Hahnel Inspire LiveView Manual De Instrucciones página 7

H
AFTER Taking Photo
Playback on Camera with LiveView ON or OFF
For the duration of the playback time set on DSLR, the
photograph taken by the camera can be viewed in
LiveView mode .
16
Screen Capture Save
A Screen Capture Save will save a low-resolution
copy of whatever image is on the screen of the handheld
transmitter.
Note: To save a low-resolution copy of the image taken by
the DSLR, ensure the transmitter is in LiveView mode and
press . This option is available for the duration of the
18
playback time set on DSLR.
Playback
Press and hold 16 . To playback and view the saved
images on the transmitter, use left and right arrows
To delete, press . To exit Playback, quick press
14
Brightness
To adjust the brightness of the transmitter screen, press
Left or Right Arrow ,
13
mode.
Signal Strength
Indicates the strength of the signal between the
transmitter and receiver
Battery Capacity Indicator
Battery 1 indicates battery capacity of the handheld
21
transmitter
Battery 2 indicates battery capacity of the receiver
22
attached to the DSLR.
Mini USB 5V Power Input
Both the transmitter and receiver have a Mini USB 5V
power input, which allows for powering of each unit
through a USB cable connected to a mains adaptor or
other USB power source. Note the USB will NOT charge
batteries in the transmitter or receiver.
Sleep Mode Options
To set the number of minutes of inactivity on the
transmitter before Sleep Mode is activated:
Press , use keys &
14 13
V= sleep mode is OFF or 10, 20, 30 minutes.
Press to confirm.
14
Press any button (except Shutter Release) to re-activate.
. Ensure NOT in Playback
15
20
to select inactivity time.
15
Optional Accessories for Inspire Remote
Control
G
1
To Synchronise Additional Inspire Receivers
Additional receivers are available to control more than one
DSLR. When using more than one DSLR (and receiver)
with the same handheld transmitter, each receiver must
be individually synchronised to the transmitter.
To access Synchronise menu, press and hold
seconds.
The first line displays a Sync Number for each Receiver.
Sync 1 is the default for the receiver supplied with the
transmitter.
To synchronise a second receiver, press right arrow
highlight Sync 2 in green. Press Select button
Transmitter is now waiting for confirmation which receiver
, .
13 15
to communicate with on Sync 2. To confirm
16
communication with the second Receiver - press the
Synchronise button on the second receiver. The LCD
shows a view from the camera.
The second line allows you to switch on and off the
display for each DSLR using the right arrow
select button
Caution
• Do not modify product
• Keep receiver and transmitter dry at all times
• Do not use in the presence of flamable gas
• Keep out of the reach of children
• Do not expose to excessive temperatures or
strong direct sunlight
• Do not leave the unit in the trunk or on the
dashboard of a vehicle. Overheating can result
in leaking, fire or explosion
• Observe correct polarity
• Dispose in accordance with appropriate
environmental regulations
• Take battery out of unit if stored for an
extended period of time.
R&TTE Directive Declaration
Hähnel Industries hereby declares that the Inspire is in
compliance with the essential requirements and other
relevant provisions of the R&TTE Directive 1999/5/EC. A
copy of the Declaration of Conformity can be viewed at
www.hahnel.ie
Up to 4 additional Receivers can be
synchronised to one transmitter
.
14
for 2
17
to
13
.
14
and
13