BH NEO LIGHT Manual Usuario página 6

EN
U S E R MA NUAL NEO LIGHT
2. Once the casing has been removed, connect the purchased Kit to one of the ends available on the inside.
3. With the objective that the cables are well-concealed and out of view, it is recommended that the cables are
passed through the inside of the frame and exit through the front of the frame, or through the rear part if the light is
to be installed on the back of the bicycle.
4. To close the casing, follow the steps for opening it in reverse.
OBSERVATIONS
The Neo Light Kit is only supported by frames containing the serial no. W1303F0001.
6