Danze Cirtangular-Brulée DF024121 Instrucciones Para La Instalación página 4

5
2. Line up the mounting template (Z) over the
horizontal line and mark the location of the
mounting bracket holes with a pencil.
3. Drill 1/4" holes for anchors (C) using 1/4" drill
bit.
4. Remove screws (C1) and black washers (C2)
from anchors (C). Tap anchors (C) into the holes
until they are flush against the surface. Use a
hammer if necessary.
5. Align mounting brackets (D) with holes on
wall. Insert screws (C1), black washers (C2) first;
tighten screws (C1) using Phillips screwdriver
until the anchors (C) expand inside wall.
6. Hang the mirrored cabinet (A) and use the
Phillips screwdriver to adjust screws at the top
of mirrored cabinet (A) to level if needed.
7. Install metal shelf holders (H) into the holes
for the side (I) and inner (J) shelves; four hold-
ers (H) are required for each shelf. Install the
side shelves (I) and the inner shelves (J) onto the
holders (H).
Please refer to Homeowner Care Manual for troubleshooting, care and mainte-
nance information.
6