Viewing The Control Panel; Install The Stand - Samsung UN40D6400 Manual Del Usuario

✎
The product color and shape may vary depending on the model.
✎
There are control buttons in rear of TV. When you touch the button, control icons appears.
✎
Any object (an electric wire, etc.) near the control panel may cause unintended activation of the OSD.
TV Rear
Remote control sensor
Power Indicator
E (Source)
MENU
o (Volume)
k (Channel)
P (Power)
Standby mode
Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be safe
and to decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on a
holiday, for example). It is best to unplug the power cord.
See separate guide for installing the stand.
A 1 EA
Stand (1EA)

Viewing the Control Panel

Aim the remote control towards this spot on the TV.
Blinks and turns off when the power is on and lights up in standby mode.
Toggles between all the available input sources. In the on-screen menu, use this
button as you would use the ENTERE button on the remote control.
Displays an on-screen menu, the OSD (on screen display) of your TV's features.
Adjusts the volume. In the OSD, use the
► buttons on the remote control.
Changes the channels. In the OSD, use the <> buttons as you would use the ▼
and ▲ buttons on the remote control.
Turns the TV on or off.

Install the Stand

B 1 EA
Guide Stand (1EA)
English - 4
buttons as you would use the ◄ and
C
x4 (M4 X L12)
D
x4 (M4 X L8)
Screws (8EA)