Record Player; Aux Connector; Light Effects - auna Graceland TT Manual De Instrucciones

RECORD PLAYER

• Set the AUX/PHONO selector switch on the rear panel to PHONO when
you want to start up the turntable.
• Press MODE to select the phono mode. Adjust the rotation speed
(switch next to the tone arm mount).
• Place a record on the turntable. Use the spindle adapter (puck) if
necessary.
• Lift the tonearm off the tray and carefully move it to the place where
you want to play the record. Then lower the tonearm carefully onto the
record.
• After the end of the record, place the tonearm back on the holder.
Note: If the auto-stop range of the record is smaller than usual, please
turn off the auto-stop function. Otherwise, the last track(s) of the album
may be stopped because the tone arm moves back.

AUX CONNECTOR

Connect external media players (MP3 player, smartphone, laptop) to the
AUX cable on the rear panel. Slide the AUX/PHONO switch to the AUX
position. Use your external device to control playback.

LIGHT EFFECTS

Press the LIGHT MODE switch on the back of the jukebox to switch the light
effects on or off. The light color changes continuously as long as the LIGHT
MODE switch on the back is set to PLAY MODE. Tilt the switch to HOLD to
stop the color change and set a specific color permanently.
EN
25