Publicidad
Enlaces rápidos
Publicidad
Manuales relacionados para West Elm 4114112
Resumen de contenidos para West Elm 4114112
- Página 3 1. Screw in cam bolts (A) into side panels (8) and (9) as shown. Insert dowel (C) into side panels (8) and (9) . Insert cam locks (B) as shown. Press panels together. Tighten cam locks (B) with screwdriver (not includ ed).
- Página 4 2. Align back rails (7). Insert screw (I). Tighten with screwdriver (not included). 2. Aligner les rails arrière (7). Introduire la vis (I). Serrez avec un tournevis (non inclus). 2. Alinee los rieles posteriores (7). Inserte el tornillo (I). Apriete con un destornillador (no incluido). 3.
- Página 5 4. Screw in cam bolts (A) into panel (11) as shown. Insert dowels (C) into panel (11). Insert cam locks (B) into side panels as shown. Press rmly together. Tighten cam locks (B) with screwdriver. 4. Vissez les boulons à came (A) dans le panneau (11) comme indiqué. Insérez les goujons (C) dans le pan neau (11).
- Página 6 6. Screw in cam bolts (A) into panel (4) as shown. Insert dowels (C) into panel (4). Insert cam locks (B) into side panels as shown. Press rmly together. Tighten cam locks (B) with screwdriver. 6. Vissez les boulons à came (A) dans le panneau (4) comme indiqué. Insérez les goujons (C) dans le pan neau (4).
- Página 7 7. Insert drawer (14) as shown. Align doors with hinge plates on side panels as shown. Adjust hinges per instructions below. 7. Un tiroir (14) comme indiqué. Alignement des portes avec des plaques de charnière sur les panneaux laté raux, comme illustré. Ajustez les charnières selon les instructions ci-dessous. 7.
- Página 8 8. Lightly press back panel inward. Insert the back panel clips (K) into slot around back panel. Insert screw (L). Tighten with screwdriver (not included). 8. Appuyez légèrement sur le panneau arrière vers l’intérieur. Insérer les clips du panneau arrière (K) dans la fente dans le panneau arrière.
- Página 9 9. With help align side frames to assembled case. Insert bolt (E), lock washer (H), and at washer (G). Tighten with supplied hex key (J). Align shelf (A), Insert bolt (E), lock washer (H), and at washer (G). Insert bolt (F), lock washer (H), and at waher (G), into the inside of the case.
- Página 10 Anti tip kit 2x Nylon Strap 2x Mounting Plate 4x Small Screw 4x Large Screw 4x NOTICE: To prevent injury and property damage from unexpected tipping of furniture, we highly recommend installation of the anti-tip kit and mending plates included with this product. Mending plates must be used to attach armoie to base cabinet.
- Página 11 Anti tip kit 2x Nylon Strap 2x Mounting Plate 4x Small Screw 4x Large Screw 4x NAVIS: Pour éviter les dommages corporels et matériels de basculement imprévu des meubles, nous recommandons fortement l’installation du kit anti-basculement et les travaux de réparation des plaques inclus avec ce produit. Plaques guérison doit être utilisé...
- Página 12 Anti tip kit 2x Nylon Strap 2x Mounting Plate 4x Small Screw 4x Large Screw 4x AVISO: Para evitar lesiones y daños a la propiedad de in exión inesperada de muebles, le recomendamos la instalación del kit anti-vuelco y las placas de reparación incluye con este producto. Placas de alivio debe ser utilizado para jar armoie de gabinete de la base.