Installation Instructions - Farberware FDW05ASWWHC Manual De Instrucciones

of the dishwasher, do not use solvents or abrasive cleaning products.
Only use a cloth with warm soapy water. To remove spots or stains from
the surface of the interior, use a cloth dampened with water with a little
vinegar, or a cleaning product made specifically for dishwashers.
• When it is not in need for a long time: It is recommended that you run a wash cycle
with the dishwasher empty and then remove the plug from the socket, turn off the
water supply and leave the door of the appliance slightly open. This will help the
door seals to last longer and prevent odors from forming within the appliance.
• Moving the appliance: If the appliance must be moved, try to keep it in
the vertical position. If necessary, it can be positioned on its back.
• Seals: One of the factors that cause odors to form in the dishwasher
is food that remains trapped in the seals. Periodic cleaning
with a damp sponge will prevent this from occurring.
INSTALLATION INSTRUCTION
INSTALLATION PREPARATION
The installation position of dishwasher should be near the
existing inlet and drain hoses and power cord.
One side of the cabinet sink should be chosen to facilitate
the connection of drain hoses of the dishwasher.
POSITIONING THE APPLIANCE
Position the appliance in the desired location. The back should rest against
the wall behind it, and the sides, along the adjacent cabinets or wall. The
dishwasher is equipped with water supply and drain hoses that can be
positioned to the right or the left to facilitate proper installation.
ABOUT POWER CONNECTION
For personal safety: DO NOT USE AN EXTENSION CORD OR AN ADAPTER
PLUG WITH THIS APPLIANCE. DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR
REMOVE THE EARTHING CONNECTION FROM THE POWER CORD.
Electrical requirements
Please look at the rating label to know the rating voltage and connect the dishwasher to
the appropriate power supply. Use the required fuse 10 amp, time delay fuse or circuit
breaker recommended and provide separate circuit serving only this appliance.
Electrical connection
Ensure the voltage and frequency of the power being corresponds to those
on the rating plate. Only insert the plug into an electrical socket which is
earthed properly. If the electrical socket to which the appliance must be
connected is not appropriate for the plug , replace the socket, rather than
using a adaptors or the like as they could cause overheating and burns.
WARNING: INSURE PROPER GROUND EXISTS BEFORE USE.
Grounding instructions
This appliance must be earthed. In the event of a malfunction or breakdown, earthing
will reduce the risk of electric shock by providing a path of least resistance for the
15