Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Retrofit Round Damper (RRD)
APPLICATION
The RRD is a round damper that is easily inserted into rigid
round ducts for retrofit zoning in forced air heating and
cooling systems. It is available in four sizes for use in 5", 6",
7", and 8" ducts.
The damper is used with Honeywell Home TrueZONE
panels and similar zone control systems. The power open,
power closed actuator draws 2.5 VA allowing multiple
dampers per zone, but delivers high torque for reliable
operation.
FEATURES
• Easy slide-in installation
• 2.5 VA allows for many dampers on one zone
• Available in 4 sizes to fit most rigid round branch
ducts
• Quiet, long life motor automatically shuts itself off in
full open and closed positions.
• Gaskets around blade and under motor housing for
low internal leakage and very low external leakage
• Range stops with easy adjustment from top of motor
• Easy to see and reliable mechanical blade position
indicator
• Easy to hook up with conventional thermostat wire
• Simple manual blade positioning with push button
gear release
SPECIFICATIONS
IMPORTANT
The specifications given in this manual do not
include normal manufacturing tolerances. There-
fore, this unit may not exactly match the listed
specifications. In addition, this product is tested
and calibrated under closely controlled conditions,
and some minor differences in performance can
be expected if those conditions are changed.
PRODUCT DATA
69-1960ES-03
Publicidad
Tabla de contenido
Resumen de contenidos para Honeywell Home resideo RRD5
- Página 1 Retrofit Round Damper (RRD) PRODUCT DATA The damper is used with Honeywell Home TrueZONE panels and similar zone control systems. The power open, power closed actuator draws 2.5 VA allowing multiple dampers per zone, but delivers high torque for reliable operation.
-
Página 2: Before Installing This Product
RETROFIT ROUND DAMPER (RRD) Construction Frame: 18 gauge G-60 or G-90 galvanized steel C channel 10-3/4 (273) with gasket, 20 gauge actuator mounting bracket. 5-3/8 (137) Blade: 20 gauge G-60 or G-90 galvanized steel sur- 1/2 (13) rounded by a black EPDM rubber gasket. 2-5/8 Shaft: 1/2”... - Página 3 RETROFIT ROUND DAMPER (RRD) 4. Slide the damper into the duct and secure it with the ZONE four supplied self-drilling mounting screws. Be care- 1, 2, 3, ETC. ful to avoid over-tightening the screws as the duct R Y W G C M6 M4 M1 may be pulled out of round.
- Página 4 69-1960ES—03 M.S. Rev. 01-21 | Printed in United States © 2020 Resideo Technologies, Inc. All rights reserved. The Honeywell Home trademark is used under license from Honeywell International, Inc. This product is manufactured by Resideo Technologies, Inc. and its affiliates.
-
Página 5: Humidificador Circular De Retroinstalación (Rrd)
5, 6, 7 y 8 pulgadas. exactamente con las especificaciones enumeradas. Además, este producto ha sido El humidificador se utiliza en Honeywell Home paneles TrueZONE y en sistemas de control de zona similares. El probado y calibrado en condiciones de máximo accionador de apertura o cierre de la energía quita 2,5 VA,... -
Página 6: Instalación
HUMIDIFICADOR CIRCULAR DE RETROINSTALACIÓN (RRD) Construcción Estructura: G-60 o G-90 calibre 18, con canal C de acero 10-3/4 (273) 5-3/8 (137) galvanizado con junta, soporte para montaje del accio- 1/2 (13) nador de calibre 20. Cuchilla: G-60 o G-90 calibre 20, de acero galvanizado 2-5/8 (67) rodeado por una junta de caucho EPDM negro. -
Página 7: Cableado Del Accionador Del Motor
HUMIDIFICADOR CIRCULAR DE RETROINSTALACIÓN (RRD) 4. Deslice el humidificador en el conducto y asegúrelo ZONA con los cuatro tornillos de montaje autoperforantes 1, 2, 3, ETC. que se suministran. No ajuste demasiado los tornil- R Y W G C M6 M4 M1 los, ya que el conducto puede deformarse. -
Página 8: Indicador De Posición
69-1960ES—03 M.S. Rev. 01-21 | Impreso en EE. UU. © 2020 Resideo Technologies, Inc. Todos los derechos reservados. La marca comercial Honeywell Home se utiliza bajo licencia de Honeywell International, Inc. Este producto es fabricado por Resideo Technologies, Inc. y sus afiliados.