ASSEMBLY
1.
Place the handles on the handlebar holder on the corresponding handlebar bars.
2.
Slide the handles over the handlebar bars until you hear "click" and they snap into place.
3.
To finish securing the handles, tighten the screws on the bottom of the handlebars using the included allen key.
1
To hold the scooter upright, without an easel, tilt the handlebars halfway up until the scooter supports itself ( A ). If the
scooter is folded, press the locking buckle to lift the handlebar. If the handlebar is unfolded to tilt or fold it, you must
press the folding button located under the headlight.
A
2
33
ELECTRIC SCOOTER FLYING
3
EN