Operation - Braun Aesculap ACCULAN GA 620 D Instrucciones De Manejo

ACCULAN drill GA 620 D
For uncoupling, pull the tool release sleeve 2 towards the drill 16,
hold it in this position and remove the tool 5.
5
Fig. 14: Uncoupling
Fig. 15: Uncoupled
2
5

6. Operation

The drill is regulated continuously up to 900 rpm by pressing the
lower trigger 20. It automatically operates in the right-handed
direction (clockwise).
To change from right-handed operation to left-handed operation
(anti-clockwise), first press the upper trigger 19 and then
additionally the lower trigger 20. As was previously the case for
right-handed operation, you can now also regulate the speed
continuously up to 900 rpm.
Note
Owing to the electronics used, a quiet beep tone is heard shortly before
the smooth start-up of the drill. This tone immediately becomes quieter
when the drill starts up.
19
20
Fig. 16
19