Product Overview - BenQ DGD24 Manual Del Usuario

The 3D glasses are designed to be emitter free and work with 3D
enabled DLP Link projectors. The DLP projector should be in 3D mode
®
and displaying 3D content.
Box contents
3D glasses x 1 Cleaning wipe x 1
• • •
USB charging cable x 1 Pouch x 1
• •

Product overview

Power on: Press and hold for 1 second until
Sensor •
the battery indicator flashes green once. If
the indicator flashes red, charge the battery.
Power off: Press and hold for 3 seconds until
•
the battery indicator flashes green once.
Left / Right Switch: Press to switch between
•
left and right sequence.
Battery indicator
Battery provides almost 35 hours
(active mode) of battery life.
USB charging port
3D_glasses_UM.indb 3
Motion range
Suggested distance of use: 2 ~ 6 meters
3D viewing guidelines
If the projector becomes disconnected due to either a change in the
viewing angle or distance, the 3D glasses turn off automatically after 60
User manual x 1
seconds.
The 3D glasses may not work properly if there is any other 3D
•
product or electronic devices turned on near the glasses or projector.
Be sure to stay within the viewing angle and optimum viewing distance
•
when watching 3D pictures. Otherwise, you may not be able to enjoy
proper 3D effects.
Battery Caution
Do not put the 3D glasses in the direct heat, humidity & Avoid fire.
•
Do not drop the 3D glasses.
•
Do not expose the 3D glasses to water or moisture, this could result in
•
malfunction.
There may be local restrictions on the disposal or recycling of batteries. Consult
•
your local regulations or waste disposal provider.
Caution
Do not place the product in a location exposed to direct sunlight, heat, fire, or
•
water. Otherwise, it may result in product malfunction or fire.
Do not apply force to the lenses of 3D glasses. Do not drop or bend the product.
•
Otherwise, it may result in product malfunction.
When cleaning, do not spray cleaner directly onto the surface of the product.
•
Otherwise, it may result in fire or electric shock, damage to the products surface,
or result in the indication labels peeling from the product surface.
Do not use chemicals containing alcohols, solvents or surfactants or chemicals
•
such as wax, benzene, thinner, mosquito repellant, lubricant, or cleaners.
Otherwise, it may result in discoloration or cracks on the product surface and
cause the indication labels to peel from the product surface.
Since the product surface and the lens are easily scratched, make sure to use a
•
clean soft cloth (superfine fibers, cotton flannel) when cleaning to avoid scratching
either the surface or the lens. As the product may become scratched if there is
any foreign material on the cloth, make sure to shake off any dust before using it.
Do not attempt to replace the battery. The battery is not replaceable.
•
Do not apply strong pressure to the lens of the 3D glasses.
•
Do not wear the glasses unless you are viewing 3D images.
•
If you experience any of the following symptoms, stop watching 3D images
•
immediately and consult a medical specialist: 1) altered vision; 2) dizziness; 3)
nausea; 4) disorientation.
Parents' careful supervision is required particularly when children or teenagers
•
view 3D images.
2013/10/4 下午 04:24:23