Tabla de contenido

Publicidad

BASIC FUNCTIONS

TURNING THE UNIT ON/OFF
Press the POWER button on unit or on remote control to turn the unit on or off.
NOTE: In CD/MP3/USB/Bluetooth/Aux in mode, when the unit is not providing the main function
for 15 minutes, the unit will automatically switch into standby mode. To turn on the unit again,
press "STANDBY" button.
ESD hints – The product maybe reset or not reset to operation of control due to electrostatic
discharge, just switch off and reconnect again.
SETTING THE FUNCTION MODE
There are 5 function modes; press the FUNCTION button [27] to change modes. The 5 modes
are:
TUNER: Listen to FM radio broadcasts.
CD: Play compact discs (CD-audio or CD-MP3).
USB: Play MP3s from USB memory sticks.
BLUETOOTH: Stream audio from wireless players with Bluetooth
The current function mode will be shown on the display [1] when you turn on the boombox.
NOTE:
The unit will automatically switch to AUX mode when a 3.5mm AUX cable is
connected to the AUX input jack [8]. Disconnect the cable to exit AUX mode.
ADJUSTING THE VOLUME
Turn the VOLUME dial [20] on the unit to increase or decrease volume. You may also use the
remote control to adjust the system volume.
EQUALIZER (EQ) FUNCTION
Press the EQ button [25] during playback to change equalizer presets. The presets are: FLAT,
CLASSIC, ROCK, POP, JAZZ, and 3D.
Choose a preset that best matches the style of music that is playing; the presets have been
calibrated to enhance your audio enjoyment.
ID3 (show tag) System
Some MP3 files are encoded with information such as the name of the song, the artist, and the
album. Together, this information is called an "ID3 tag".
Press the ID3 button [23] to cycle through which information to display when playing an MP3 file,
or choose not to show any ID3 information at all.
User's Manual
22
.
®
E N

Publicidad

Tabla de contenido
loading

Tabla de contenido