Mastro M80 Manual De Instrucciones página 8

On opening the packaging, check carefully to make sure the appliance is intact and that there are no
sing of damage. If in any doubt contact immediately your dealer that will help you in a professional
way.
The packaging materials should be collected and disposed in conformity with the safety rules in force.
Keep out of the reach of children and irresponsible persons because are potential sources of danger.
If you decide not to use the appliance anymore remember to unplug it so that it cannot be used, and
then cut the cable in the point where it comes out of the appliance. Contact specialized firms for
information on the disposal of the components of the appliance.
The installation must be carried out only by professionally qualified persons who are authorised
to perform such tasks and must be comply with the regulations in force in the place in which the
appliance is installed . Incorrect installation may result in injury of persons or animals, or damage to
property, for which the manufacturer cannot be held responsible.
Before using the appliance read carefully the notices and the instructions:
The appliance must be placed on a stable, flat surface.
•
Not installed outside.
•
Make sure that the appliance is not resting on the power supply cable.
•
Make sure the voltage and frequency values of the supply mains correspond to the ratings indicated
•
on the label featuring the appliance's technical data.
Make sure the ratings of the system are suitable for the power absorbed by the appliance and/or
•
maximum voltage.
It's compulsory to earth the appliance. Check that the grounding system is in compliance with the
•
actual safety laws.
The external equipotential terminal must be connected to a equipotential node.
•
Three fase version: connect the motor correctly so the blade, if viewed from the grinder, rotate
•
clockwise.
UNPACKING, INSTALLATION AND CONNECTION
GB
5