Morso S11 Serie Instalación página 4

Installation of fresh air box Morsø S11 series
The stove is places carefully with the backside down. To avoid damage to the stove or the
floor, a sheet of cardboard may be used as underlay.
First, remove the regulation handle, and then install the fresh air box using the nuts and wash-
ers included.
The regulation handle is then put back in place inserting it into the slot in the fresh air box
and positioning it so that the fork at the end of the handle grasps the peg.
The enclosed heat shield is not to be used when fitting the fresh air box to Morsø S11-44
and S11-90.
4