S E T U P I N S T R U C T I O N S
DOCKING AND PLAYING YOUR IPOD
Follow these steps to dock and play your iPod in the Mint amplifier or Mint wireless dock.
1. Select the correct iPod adapter for your iPod model.
I
iPod mini
I
iPod with color display 20/30G
I
iPod with color display 40/60G
I
iPod with video 30G
2. Insert correct iPod adapter into the Mint amplifier or the Mint wireless dock. (To remove adapter,
place a coin into the narrow slot at the back of the adapter and lift.)
3. Set your iPod in the adapter so that the connection is snug.
4. Press the iPod button on the Mint amplifier or remote control. It should glow green.
5. Turn your iPod on and select your favorite music. Your iPod is charged while in the Mint amplifier
or Mint wireless dock that is plugged into a wall outlet.
MONDO MINT WIRELESS DOCK
The Mint wireless dock allows you to play and control song
selection and volume on your iPod up to 100 ft (30 m)
from the Mint amplifier.
Attaching the Mint Wireless Dock Antenna
1. Attach the antenna into the back of the Mint amplifier.
2. Before raising the antenna, turn the grooved part of the
antenna clockwise until it is finger tight—but do not use
force, as it may break and require replacement at your cost.
3. Raise the antenna upright at the joint to position it so that
it shows above the top of the Mint amplifier.
Pairing the Mint Wireless Dock to the Mint Amplifier
1. Connect the power cord to the Mint wireless dock and
plug it into a wall outlet. The Mint wireless dock is
automatically paired with the Mint amplifier at the factory.
2. Move the dock close to the Mint amplifier and press the
wireless audio source-selection button on the Mint amplifier.
The light on the Mint wireless dock will glow a steady green.
3. Your Mint wireless dock is now ready to use. Place your Mint wireless dock where it is most convenient
for you indoors within 100 feet of the Mint amplifier. The Mint wireless dock will remain paired, even
if you unplug and reposition the Mint wireless dock in another location. Dock your iPod and enjoy
music freedom!
4. If the Mint wireless dock blinks red, the dock has not been paired properly. Please see our Tips and
Quick Fixes section in this guide or online at www.mondo-usa.com/service for more information.
Note: If you experience interference over the wireless connection:
I
Move the Mint wireless dock closer to the Mint amplifier.
I
Remove any major obstructions between the Mint wireless dock and the Mint amplifier.
08 ENGLISH
I
iPod with video 60/80G
I
iPod nano: use the dock that came with
your nano.
I
iPod shuffle: use the Line In connection.
1
2
3
S E T U P I N S T R U C T I O N S
CONNECT YOUR COMPUTER
®
Compatible with Microsoft
Windows
XP and
®
Windows Vista
TM
operating systems. Compatible
with Mac OS 9 and Mac OS X operating systems.
1. Quit all applications on your computer.
2. Connect the USB cable from the Mint amplifier to a
USB port on your computer. (For best quality, connect
directly to your computer's USB port, not through a
USB hub.)
3. Press the USB button on the Mint amplifier or remote control. It should glow green.
4. PC: You will see the message, "Mondo Digital Music Station" appear. All of your sound will now
play through the Mondo Mint Digital Music Station.
Mac OS 9: See your Mac user manual for instructions on setting up a USB audio device.
Mac OS X: In System Preferences, open the Sound Control panel. Choose "Mondo Digital Music
Station" for sound output and close the control panel. All of your music and computer sound will
now play through the Mondo Mint Digital Music Station.
Need more information on connecting to your PC or Mac? Go to www.mondo-usa.com/service or
consult your computer's user manual for information on operating its sound system.
Mac OS X
ENGLISH 09