HAMPTON BAY HB7023P-06 Guía De Uso Y Cuidado página 6

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation (continued)
2
Mounting the hardware
Thread the fixture mounting screws (FF)
into the provided holes of the mounting
bracket (GG).
Thread the hex nuts (BB) onto the fixture
mounting screws (FF). Do not tighten the
hex nuts (BB) at this time.
Pull the supply wires out from the outlet
box and mount the mounting bracket (GG)
to the outlet box using the bracket
mounting screws (EE).
Place the back plate of the fixture body (A)
over the outlet box and onto the fixture
mounting screws (FF).
Adjust the fixture mounting screws (FF)
until they protrude out from the back plate
1/4 in.
Remove the fixture body (A) and secure
the position of the fixture mounting screws
(FF) by tightening the hex nuts (BB)
against the mounting bracket (GG).
3
Connecting the wires
NOTE: If you have electrical questions consult
your local electrical code for approved
grounding methods.
Connect the black supply wire to the black
fixture wire using a wire nut (DD).
Connect the white supply wire to the white
fixture wire using a wire nut (DD).
Connect the fixture ground wire to the
supply ground wire using a wire nut (DD).
Wrap all wire connections with electrical
tape for a more secure connection.
EE
FF
BB
A
6
GG
GG
DD

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Hb7023p-05240 348240 367

Tabla de contenido