Installing The Battery - KlipXtreme KPS–006 Manual De Instrucciones

Press it to activate the pointer
Laser beam
Press it to toggle between full screen and slide
Play/Escape
show presentation mode
Press it to exit the application
Close
Press it to return to the previous page
Scroll up
Press it to bring up the blank screen or to resume
Black screen
the presentation
Press it to advance to the next page
Scroll down
Press it to exit the black screen mode
Standby/Restart
Ultra-compact receiver can be stowed at the
Nano receiver
bottom of the presenter or left connected to your
PC or laptop USB port

2.2 Installing the battery

1. Remove the battery cover, located on the back of the device.
2. Take one of the supplied CR2025 batteries and insert it inside the compartment.
3. Windows will detect the USB plug and will integrate it into the operating system.
4. Instant and trouble-free wireless connectivity is achieved once the automatic pairing
process between the receiver and the mouse is complete.
Battery Positive pole (+) upward