Tuner Operation; Preset Station - ASA Electronics MA112 Manual De Instalación Y Operación

TUNER OPERATION

1
2
3
Disclaimer: Antenna selection will impact reception.
Select a Band
Press the button (1) to enter source menu. Then rotate the VOL/ENTER knob
(4) to select AM/FM radio mode and press VOL/ENTER button (4) to confirm
entering AM or FM radio mode.
Manual Tuning
Press and hold the or buttons (3, 5) to enter manual tune mode, press
buttons (3, 5) again to seek stations up/down step by step.
Auto Seek Tuning
Press the or buttons (3, 5) to automatically seek the next or previous strong
station.

Preset Station

Press and hold the VOL/ENTER button (4) to enter Preset Station menu.
4 5
Save Presets
Rotate VOL/ENTER knob (4) to select desired location, press and hold VOL/ENTER
button (4) to save current station in the selected desired Preset Stations.
Delete Presets
Rotate VOL/ENTER knob (4) to select the location, press and hold
delete the station saved in the location.
Recall Presets
Rotate VOL/ENTER knob (4) to navigate through the memorized preset stations,
press VOL/ENTER button (4) to confirm selection and playback the preset frequency.
Auto save Presets / Scan Presets
Press the menu button (6) to enter radio menu, then rotate the VOL/ENTER knob
(4) to navigate through following menu items: AUTOSAVE PRESETS and SCAN
PRESETS.
7
Scan Presets
Rotate VOL/ENTER knob (4) to select Scan Presets, press VOL/ENTER button (4) to
scan stations stored in current band. The unit will play for ten seconds at each preset
6
station. Press button (7) to stop scanning when the desired station is reached.
AutoSave Presets
Rotate VOL/ENTER knob (4) to select AutoSave Presets, press VOL/ENTER button
(4) to confirm selection. The screen will display "Autosaving Presets..." while the unit
scanning the frequency. The unit will automatically scan for and store 18 strongest
stations for AM or FM.
or
NOTE: Only stations detected with sufficient signal strength will be stored in
the preset channels automatically.
9
MA112
button (5) to