Battery Replacement - Sejoy ET-101A Manual Del Usuario

1. Battery needs replacing when the LCD displays the icon
shown in Figure10 and then turns off.
2. Slide battery cover down as shown in Figure 11.
3. Remove battery as shown in Figure 12.
4. Replace with one new battery(CR 2032.) Place theˇ + ˇ
side upward.
Accuracy:
±0.2℃ /±0.4℉ ( 35.5℃ ~ 42.9 ℃ ; 95.9 ℉ ~ 109.2 ℉)
±0.3℃ / ±0.5℉ ( under 35.5℃ / 95.9 ℉ )
Response Time:Approximately 2 Seconds
Test Range:32.0 ℃ ~ 43.0 ℃ (89.6℉ ~ 109.4℉ )
Store and Transport Environment:
- 25℃ ~ 55 ℃ ( - 13℉ ~ 131℉) , ≤ 95% RH, non-condensing
Operating Environment:
10℃ ~ 40 ℃ ( 50℉ ~ 104℉) , ≤ 95% RH, non-condensing
Dimension:106x33x45mm
Weight:Aprox.34.5grams
Battery: One 3.0V DC button battery (size CR2032)Ł
Battery Life: 2 years / 1000 measurements
8

Battery Replacement

Specifications
Type B applied part
Direct Current
Correct Disposal of This Product
( Waste Electrical & Electronic Equipment)