SANITIZING & DEODERIZING MASKS, TUBING & PARTS:
1.
Disconnect masks, tubing, Tees and accessories from machine.
2.
Using a cleansing wipe or damp, clean cloth, lightly surface clean mask,
nasal pillow or other surfaces of visible residue.
3.
Place Purify O3 Elite sanitizer and accessories to be sanitized/deodorized
inside the supplied sanitizing/travel case. (For best results, connect
CPAP tubing directly to the Purify O3 Elite as shown in Figure 2.) If the
accessories are too large for the sanitizing case, a medium-sized storage
container with tightly fitting lid (12 qts or less) may be used, refer to
Figure 3 below.
NOTE: Purify O3 Elite is intended for use to sanitize and deodorize accessory
items only. Please refer to your user manual for guidance on cleaning
and disinfection of the PAP or nebulizer machine.
Figure 2
Figure 3
Operate only in a well ventilated area.
Do not breathe or ingest the ozone.
CPAP Mask shown attached to Purify O3 Elite
WARNING:
5