Tripp-Lite WEBCARDLX Manual Del Propietário página 6

Installation
3 - Static IP Address Assignment/Terminal Menu
Configuration Settings
3-1
Determine IP Information: The WEBCARDLX can support a single static IPv4
address (requires setting the IP address, subnet mask and gateway) and/or a
single static IPv6 address. In addition, the WEBCARDLX can support a single
static IPv4 or an IPv6 DNS address that is required to be entered.
3-2
Configure Terminal Emulation Program: Be sure to apply the latest Windows
updates to your operating system.
Windows 7, 8, 10: Connect your PC to the Micro-USB port on the WEBCARDLX
using the included cable.
Windows 7: Windows will detect new hardware and install the in-build USB-to-
serial driver.
Windows 8: Windows will detect new hardware, but may not install a suitable
driver. If this happens, right-click the device in Device Manager, and click Update
Driver Software. Select Search Automatically. It may take some time, but
Windows will identify and install a compatible USB-to-serial driver from the internet.
Windows 10: Windows will detect new hardware and install a USB-to-serial
driver from Microsoft.
18-09-509-9335A5.indb 6
6
10/17/2018 1:41:46 PM