4. Attach the large bent bottom panel using three screws.
5. With the rails facing inward, gently attach the opposite side panel to
the display case using six screws.
6. Carefully place the front panel onto the side panels. Attach using six
post and screws.
www.vollrath.com
The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53081-3201 U.S.A.
Main Tel: 800.624.2051 or 920.457.4851
Main Fax: 800.752.5620 or 920.459.6573
Customer Service: 800.628.0830
Canada Customer Service: 800.695.8560
7. Attach the clear handles to the rear doors using two screws and two
self-locking nuts.
8. Open both rear doors and install the four trays.
CLEANING
NOTICE: Do not use cleaners containing ammonia, alcohol, acetone
or dry cleaning products. Cleaners with these chemicals
will damage, acrylic and other plastics.
NOTICE: Do not use paper towels, abrasive materials, scratching
cleansers, razor blades, brushes, steel wool or scouring
pads, such as Scotch Brite
NOTICE: Do not use WD-40
cleaning products.
Trays
Clean the trays using a very soft cloth, clean, warm water and a mild
diluted dish soap.
Acrylic Panels
• Clean the acrylic panels with a soft cloth and a solution of warm
water and a small amount of dish detergent, or products specifically
made for cleaning acrylic.
• Recommended cleaners include: Novus
Brillianize.
• Rinse the acrylic panels with plain water.
• Dry using a soft cloth, preferably a microfiber towel or a chamois.
Removing Minor Scratches
• Fine scratches can be removed with a specialized mild abrasive
polish such as Novus® #2, or Novus® #3. Heavier scratches can be
removed by buffing and sanding. Sand with a series of grits (250,
400, 600) followed by a buffing wheel and buffing compound.
Technical Services
techservicereps@vollrathco.com
Induction Products: 800.825.6036
Countertop Warming Products: 800.354.1970
All Other Products: 800.628.0832
©
2017 The Vollrath Company L.L.C.
®
pads.
®
or petroleum, industrial or commercial
®
#1, Plexiclear, and
Part No. 2350242-1 ml
3/28/17