Technical Description - PROUSER CC-CA Manual Del Usuario

Modified Sine Wave Device guides
4

Technical description

The inverters are used to convert a direct current of 12V into a 230V AC supply of 50 HZ,
and/or 5V 2100mA (INC150N with 1000mA) voltage (USB).
The inverter can be operated wherever there is a 12V DC supply. The devices are
additionally cooled with a load fan.
The maximum constant output for the devices is as follows:
● For INC150N and INV150N inverters 150W
● For INV300N inverter 300W
● For INV600N inverter 600W
● For INV1000N inverter 1000W
● For INV1500N inverter 1500W
● For INV2000N inverter 2000W
Never connect devices that have a higher power requirement.
The inverter is equipped with protection against thermal and electrical over-loading, as well
as excess and insufficient voltage. The inverter alarms and switches off:
● if its internal temperature is too high
● if the load exceed the values stated above
● if the input voltage is too high or too low
The inverter can be switched on and off using the switch directly on the device.
7