Página 2
1. Lay table top onto a clean smooth surface such as carpet or cardboard. Remove the two shipping braces with a phillipshead screwdsrive as shown. Align the two tops and lock the table locks by turning. 1. Lay table sur une surface lisse et propre comme une moquette ou du carton. Retirez les deux accolades d’expédition avec une screwdsrive phillipshead comme indiqué.
Página 3
2. Align leg frames as shown. Insert bolts (A), lock washer (D), and at washer (C). Tighten with supplied hex key (E). Align 3 wooden rails as shown. Insert bolts (A), lock washer (D), and at washer (C). Tighten with supplied hex key (E). Align leg frame brackets as shown. Insert bolts (B), lock washer (D), and at washer (C).