Morsø S11-40 Instalación página 4

Installation of legs and base for the Morsø S11 series
After unpacking, the stove is placed carefully with the backside down. To avoid damage to
the stove or the floor, a sheet of cardboard may be used as underlay.
The base or the separate legs, as desired, are mounted using the washers and nuts included.
If the stove is installed with a base, the two distance rails must be positioned between the
base and the stove and then fastened to the stove together with the base.
Note: The paper in which the base or the separate legs are wrapped must not be disposed
of by burning.
4