Conceptronic CBTCARKIT Guía De Iniciación Rápida página 12

ENGLISH
3. Before using the CBTCARKIT:
Before you start using the Conceptronic Carkit with a phone for the first time,
you need to:
Insert the Carkit into the cigarette-lighter of your car
Turn the ignition key of your car to on
Turn the Carkit on
Pair the Carkit with your mobile phone
Make sure your phone is within 10 meters of the Carkit and that there are
no obstructions, such as walls or other electronic devices between the
hands-free unit and the phone.
4. Using the CBTCARKIT
4. 1 Turn on the CBTCARKIT:
When the ignition key is turned to on and the power of the Carkit is also on, you
will see the Carkit lights turning to blue.
4.2 Turn off the CBTCARKIT:
When the ignition key is turned to off the Carkit will be off.
When the Power button is turned to off the Carkit will be off.
When taken the Carkit out of the cigarette lighter the Carkit will be off.
4.3 To pair the Carkit with your mobile phone:
Before you can use your mobile phone handsfree you need to pair it with the
Carkit (both devices needs to get a 'relation' before you can use them together).
•
Plug the car kit into the cigarette jack and switch on the carkit.
•
Press and hold the 'PAIRING' button of the Carkit for approximately three
(3) seconds until the indicator LED of 'CONNECTED' is blinking. You will
hear a tone. This indicates that the car kit is in pairing mode and waiting to
be paired with another Bluetooth
•
Set your mobile phone to search for Bluetooth
searching for surrounding Bluetooth
range and shows them in a list.
®
device.
®
devices. The phone is
®
devices within about 10 meters of
12